Powkiddy V20 Setup Guide
Buy the Powkiddy V20 here: https://joeysrh.link/ALI_PKV20
Table of contents
Recommended Accessories
- MicroSD Card: 128GB or 256GB (with the platforms this plays, you would be safe with either of these options)
- MicroSD Card Reader: UGREEN SD Card Reader
- Charger: UGREEN 65W Charger (use the USB-A port for charging)
Stock Setup Guide
Adding ROMs & BIOS
Connect your SD card to your PC.
Head inside the roms folder, and you should see a bunch of folders for all of the systems that the device supports.
It should be pretty self explanatory at this point, but you want to move your ROMs for each system into the corresponding system folder.
For BIOS, you cannot access the BIOS folder.
Custom Firmware Options
Custom firmware is a replacement for the stock firmware that we setup above. If you would like to try out any custom firmware, I would recommend using a separate brand new SD card and keep your stock one just in case you want to switch back.
KNULLI
You can find the full setup guide for KNULLI here: KNULLI Setup Guide.